Custom sized belt, 1.25" width, Horween Dublin leather, heel bar buckle - brown nut

$115.00




**YOU MUST MEASURE YOUR BELT SIZE ACCORDING TO THE INSTRUCTIONS BELOW - IT IS NOT THE SAME AS YOUR PANT SIZE.**

THE ONE STAR BELT

1.25 inches in width, finished with a heel bar buckle and chicago screws. Chicago screws are removable, so if you later find an awesome center bar belt buckle at a thrift store or in your uncle's attic that you want to use with your nicely-aged belt strap, you can change the buckle yourself easily with a flathead screwdriver.

Leather keeper is 3/4" thick and is hand sewn. The leather is incredible - Dublin from the legendary Horween Tannery in Chicago. This leather is soft and supple and will stretch about 1" as you break it in (I work that into the sizing, see below). The edges are beveled, dyed and burnished.

BELT MEASUREMENT ("SIZE" - ENTER ABOVE) - **IMPORTANT**

Each belt is custom sized. The measurement I need is *NOT* your pant size. Keep reading:

To determine your belt size, measure a current belt that fits you well. Measure the distance (in inches) from the hole you use most to the other end of the belt where the leather folds over the buckle (at the base of the buckle prong). You will probably notice that your belt size is a few inches larger than your pant size.

When you receive your belt, the middle of 5 holes will be 1" smaller than your measurement. This is to account for about 1" of stretch in the belt as it breaks in. After break-in, your given measurement should fall close to the middle hole. This is not an exact science and each piece of leather will break in slightly differently.

Remember to double check your belt measurement! I AM NOT RESPONSIBLE FOR MISTAKES IN MEASUREMENTS. The size you order is the size you will receive.

Custom sized belts are not returnable unless I made a mistake (in which case please contact me and I will correct it!).

BUCKLE OPTIONS - reference included photos

1. Nickel
2. Matte Nickel
3. Brass
4. Antiqued Brass
5. Black PVD
6. Roller Nickel
7. Roller Matte Nickel
8. Roller Brass
9. Roller Antiqued Brass
10. Roller Black PVD
11. Roller Solid Copper (+$10)
12. Roller Stainless Steel

ABOUT US

Our products are 100% handmade in our little garage workshop in California. No sewing machines, no assembly lines. Just top quality raw materials put together by hand. To learn more, check out Etsy's 2012 feature of my shop: http://www.etsy.com/blog/en/2012/featured-shop-one-star-leather-goods/ And read more about my philosophy at http://onestarleathergoods.com/philosophy/

Proudly handmade in the U.S.A. by One Star Leather Goods. For more info visit onestarleathergoods.com

Returns & Exchanges

I gladly accept returns, exchanges, and cancellations

Just contact me within: 7 days of delivery

Ship items back to me within: 14 days of delivery

Reviews (1)

Average:

This belt is exactly what it's supposed to be. All features and measurements were as expected, the leather is tanned beautifully, and the belt is breaking in nicely. I had high expectations for this item and I am not disappointed. Pay attention to the expected ship time, which is not short. It actually took 39 days for my belt to arrive, which was a couple weeks longer than the original date. On the original date I received a note from the seller to notify me it would be late and to explain, which I appreciated... but 39 days is still a long time to wait for a single item order. Other than that - no complaints. The belt is great and ultimately I would order from One Star again.


Legal imprint